BUTT Loading Scissor-Type Table-Lift
in tandem design. Load as desired with one loading lip on each narrow side. The platform is in the lowered position at ground level. At your choice: overclearance with 15 tonnes axle load in the lowered position. At your choice: controlling the platform through the floating railing with mechanical operating buttons or fixed railing with UP-DOWN function button. Additional buttons possible, also as flush mounted switches in the building wall.

Combination Scissor-Type-Table-Lift/Sliding-Adjustable Ramp

This combination can be used both Scissor-Type-Table-Lift and Sliding-Adjustable ramp and is so a space-saving option to the seperate installation.

Its advantages in detail:

Particularly safe:

• Allround safety contact rail at the top frame to protect against crushing
• Dead man controls for raising and lowering
• Maintenance supports designed for max. load
• Pipe break security in the event of a hose rupture
• The safety specifications meet the European machine directive, EN 1570 and UVV/VBG 14
• Protection type: IP 54
• Control voltage: 24 volt DC for all functions incl. solenoid valve
• Dimensioned for a 50 % static overload and tested accordingly

Particularly economical:

• Complete assembly kit
• Ready for connection using CEE plug
• Version ready for installation

Safety instructions:

• At a drop height of 1 m or more (ramp height), the ramp must be secured in the area of the lifting table. This can be accomplished with the aid of a gantry scaffolding (portal height = ramp height + 1100 mm).
• If personnel is to ride along on the lifting table, ensure that the platform is provided with means for holding on. This can be accomplished with the following: Plug-in railing, Fixed railing, Gantry scaffolding, Control column.
• If the control is to take place from the platform, an underrun protection is required at the accessible sides of the lifting table. This also applies when the bottom area of the lifting table is not directly visible from the control column.
• When fork lift trucks drive on the platform while in extended position, a roll-off protection is required on the free sides. This also applies to other rolling loads.

Qualitätsmerkmale:

• Laufrollen als wartungsfreie Wälzlager
• Verwindungssteife Rohrrahmenkonstruktion
• Lange Lebensdauer durch optimierte wartungsfreie Radialgelenklager (keine Buchsenlagerung)
• Selbsttragender Grundrahmen (nachträgliches Untergießen ist nicht notwendig)
• Scherenarme als Vollstahlschere
• Frei einstellbarer Endschalter für obere Endlage (gilt für Verladetische)
• Zylinder mit hartverchromten Kolbenstangen
• Totmann-Steuerung über im Schaltkasten integrierte Taster inkl.Not-Aus und abschließbarer Hauptschalter am 10 m langen Kabel
• Hochwertiger Korrosionsschutz durch Sandstrahlen, Phosphatieren, Grundieren und Decklackieren der Hubtischkonstruktion mit einem Zweikomponentenlack in der Standard-RAL-Farbe 7037 (weitere Farben gegen Mehrpreis)

Quality features:

• Running rollers as maintenance free roller bearings
• Distorsion stiff tubular section frame construction
• Long service life due to optimized, maintenance free radial pivoting bearings (no bush bearings)
• High quality corrosion protection as a result of sand blasting, phosphatizing, and priming as well as coating the lifting table construction with a two-component lacquer in the standard RAL colour 7037 (additional colours available at a surcharge)
• Self-supporting base frame (subsequent underpouring is not necessary) • Scissor arms as solid steel scissors
• Freely adjustable limit switch for the top end position (applies to loading tables)
• Dead man controls via buttons integrated in the switch box, incl. EMERGENCY STOP and lockable main switch on a 10 m long cable
• Cylinder with hard chromium plated piston rods

Standard accessories for loading lifting platforms:

1. Loading bridge: mechanical design, reinforced steel construction 7° and 15°, 385 mm reach
2. Loading bridge: mechanical design, reinforced steel construction 7° and suspended, 345 mm reach
3. Loading bridge: mechanical design, reinforced aluminium construction, made RPB 40, 7° and 15°, 385 mm reach
4. Loading bridge: mechanical design, reinforced aluminium construction, made RPB 40, 7° and suspended, 345 mm reach
5. Loading bridge: laterally displaceable, aluminium construction, type KBS, 410 or 535 mm reach
6. Fixed railing: 1100 mm high, tubular steel, optionally available with command unit
7. Plug-in railing: 1100 mm high, 800 mm long, tubular steel
8. Control plug-in railing: 1100 mm high, 600 mm long, incl. UP/DOWN switching function in dead man controls and one EMERGENCY STOP, tubular steel
9. Control column: Height 1750 mm, tubular steel
10. Gantry structure: Height according to the ramp dimensions, optionally available with command unit, tubular steel
11. Underrun protection: Pull-down apron construction, cloth colour: yellow
12. Mechanic roll-off protection
13. Wheel load: 7,5 ton lorry wheel
14. Wheel load: 10 ton lorry wheel
15. Hot galvanizing
16. Hydraulic unit: Mounted outside of the lifting table in an oil leakage pan

Click to play the
Flash-Video file.