To be provided by the customer: U-beam section 200, placed in concrete with the appropriate anchors. This version is suited to the "stationary transfer bridge" or in connection with the C-rail supplied by us that can also be used for lateral movement.

model length in mm width in mm load in kg empty weigth in kg   HF 00 1.235 1.250 4.000 52     HF 01 1.235 1.500 4.000 61     HF 02 1.485 1.250 3.500 61     HF 03 1.485 1.500 3.500 72     HF 04 1.735 1.250 3.000 70     HF 05 1.735 1.500 3.000 83     HF 06 1.985 1.250 2.000 82     HF 07 1.985 1.500 2.000 86     HF 08 2.235 1.250 1.500 91     HF 09 2.235 1.500 1.500 107     HF 10 2.485 1.250 1.200 100     HF 11 2.485 1.500 1.200 118     HF 15 1.235 1.250 4.000 52     HF 16 1.235 1.500 4.000 61     HF 17 1.485 1.250 4.000 65     HF 18 1.485 1.500 4.000 76     HF 19 1.735 1.250 4.000 75     HF 20 1.735 1.500 4.000 88     HF 21 1.985 1.250 4.000 91     HF 22 1.985 1.500 4.000 105     HF 23 2.235 1.250 4.000 101     HF 24 2.235 1.500 4.000 117     HF 25 2.485 1.250 4.000 116     HF 26 2.485 1.500 4.000 134

Other dimensions upon request.

The model HF aluminium transfer bridge can be used universally and it forms a safe bridge between the ramp and the vehicle. It is available in a variety of options.

the basic equipment

• a solid tongue support
• a moveable approach tongue - the rubber profile on the lower side keeps you from slipping off
• non-slip travelling surface
• resistant to weather
• shifting square for securing against slipping off

additional equipment

• transportation wagon
• fixed roller - one person can roll the HF transfer bridge to place of use
• stacking pockets - the transfer bridge is driven to the place of use with a fork-lift truck

The employer's liability insurance association says that transfer bridges may not have an inclination of more than 12.5% or 7°.

model        crossover length mm     crossover width mm    height difference mm    load kg            A mm    empty weight kg             HFB-1 500 1.250 60 4.000 200 22     HFB-2 500 1.500 60 4.000 200 26     HFB-3 750 1.250 90 4.000 410 30     HFB-4 750 1.500 90 4.000 410 38     HFB-5 1.000 1.250 120 4.000 660 42     HFB-6 1.000 1.500 120 4.000 660 50     HFB-7 625 1.250 75 4.000 285 28     HFB-8 625 1.500 75 4.000 285 33

Other dimensions upon request.

The special model KBS transfer bridges are well suited to transferring goods on the ramp. They overcome smaller to medium-sized heigh differences and can be operated by one person. Made of sturdy corrosionresistant aluminium, they satisfy the high requirements in modern goods transportation.

The KBS bridge cannot be suspended and is held by a galvanised guide section that is welded or screwed onto the front edge of the ramp. The bridge can be moved in the lateral direction in the section. The drop securing device automatically catches when the bridge is raised.

After releasing the drop securing device, you can lower the bridge with the return motion lever mounted on the side.