Technical data
Electro-hydraulic dock leveller with telescopic lip
Higher load capacity on request.
Gradient/incline up to max. 12.5% according to legal regulations and standards. Derived from this, the length of a dock leveller with telescopic lip depends on 2 conditions:
max. height difference between ramp height and
the HGV loading area
Type of means of transport
(gradeability/ground clearance)
The rule of thumb is:
Hand pallet trucks 3%
Powered lift trucks 5%
Electric forklift trucks 10%
Gas or diesel forklift trucks 12.5%
Telescopic lip optionally 600 mm or 1,000 mm
Standard height 700 mm
Typ | Length (mm) | Width (mm) |
---|---|---|
HV 2020-6 | 2.000 | 2.000 |
HV 2022-6 | 2.000 | 2.250 |
HV 2520-6 | 2.500 | 2.000 |
HV 2520-10 | 2.500 | 2.000 |
HV 2522-6 | 2.500 | 2.250 |
HV 2522-10 | 2.500 | 2.250 |
HV 3020-6 | 3.000 | 2.000 |
HV 3020-10 | 3.000 | 2.000 |
HV 3022-6 | 3.000 | 2.250 |
HV 3022-10 | 3.000 | 2.250 |
HV 3520-6 | 3.500 | 2.000 |
HV 3520-10 | 3.500 | 2.000 |
HV 3522-6 | 3.500 | 2.250 |
HV 3522-10 | 3.500 | 2.250 |
HV 4020-6 | 4.000 | 2.000 |
HV 4020-10 | 4.000 | 2.000 |
HV 4022-6 | 4.000 | 2.250 |
HV 4022-10 | 4.000 | 2.250 |
HV 4520-6 | 4.500 | 2.000 |
HV 4520-10 | 4.500 | 2.000 |
HV 4522-6 | 4.500 | 2.250 |
HV 4522-10 | 4.500 | 2.250 |
HV 5020-6 | 5.000 | 2.000 |
HV 5020-10 | 5.000 | 2.000 |
HV 5022-6 | 5.000 | 2.250 |
HV 5022-10 | 5.000 | 2.250 |